|
Product introduction
1001H is a Maleic anhydride grafted polyethylene developed by Ningbo Haoxin Yuron New Material Co., Ltd. with a new process. The appearance is white or light yellow powder. The grafting rate of the material is higher than the traditional process on the market.
|
Performance
|
value
|
unit
|
testing method
|
|
density
|
0.91
|
g/cm3
|
ASTMD792
|
|
melt index (190℃/5KG)
|
2
|
g/10min
|
ASTMD1238
|
|
percent grafting
|
high
|
/
|
acid base titration
|
|
loss on drying
|
≤0.3
|
%
|
105℃, 10min
|
Note: The actual test value of the above resin slightly fluctuates, about 1% higher
Scope of application
1001H is mainly used in maleic anhydride graft PE for polyethylene plastic wood, filling master material, aluminum plastic composite, iron plastic composite, polyolefin/nylon system compatibility, film modification, etc, Can also be used for UV light curing coatings.
Packaging and storage
1001H 20KG/ bag, woven bag, inner plastic bag.
It needs to be stored under dry conditions, away from high temperature and ultraviolet radiation, if improperly stored, the performance of the material will be reduced.
|
